"Small apartment study decoration design" toilet is an indispensable part of the whole room, but because the space needs to be constantly exposed to water, in order not to affect the normal life in the future and avoid conflicts between neighbors, the waterproof work of the toilet should not be ignored. So, how to decorate the toilet properly? Let's listen to the editor.
Toilet is an indispensable part of the whole room, but because the space needs to contact water frequently, so in order not to affect the normal life in the future and avoid conflicts between neighbors, the waterproof work of toilet should not be ignored. So, how to decorate the toilet properly? Let's listen to the editor.
1. The grass roots should be leveled
How to decorate the bathroom? The ground and wall surface should be leveled first, because each step can be carried out only after the base course is leveled. The correct operation method is to check with tools. Once the unevenness is found, cement mortar can be used to level it according to a certain proportion, so as not to affect the construction effect in the future.
2. Apply waterproof material
After the walls and floors are leveled, the waterproof materials can be applied. As for the waterproof coating, it is recommended to select the products with higher waterproof performance, which are in line with national standards and with formal certificate of conformity. In addition, when daubing, should pay attention to the thickness uniformity, and the joint should be brushed in place.
3. Pay attention to waterproof height
After the waterproof materials are applied, attention should also be paid to the height part of the toilet wall. Generally, it is recommended to do a waterproof coating with a height of about 30cm, which is mainly to prevent water from seeping into the wall of the toilet. Because the toilet is the most humid space in the whole room, the height of waterproof coating on the wall of toilet is highly required.
4. The groove of waterproof wall should be done well
Of course, how to decorate the bathroom? The internal water pipe groove should also pay attention to the waterproof problem. When pipelines and floor drains pass through the floor, the waterproof layer around the holes must be carefully operated. The groove larger than the pipe diameter shall be made for laying the water pipe, and the coating in the groove shall be plastered fully and smoothly, and then the groove can be evenly coated.
5. Closed water test must be done
The most important step is to carry out closed water test after all construction operations are completed. The detection method is to block all the water outlets in the toilet, and then pour appropriate amount of water into the toilet. After waiting for 24 hours, check whether there is leakage on the ground or wall around. If not, the waterproofing works are successful; On the contrary, it needs to be reworked until it is finished.
Conclusion: Well, for the bathroom how to decorate the waterproof part will be introduced to you. To sum up, waterproof work for the bathroom space is still very important. Therefore, in order not to affect our lives and avoid conflicts, toilet waterproof engineering should be done well.
"Decoration design of small house study"